Black Box 16 port - Manual (Page 183)

Black Box Console Server user guide 183
Where:
password if you include this argument you will prompted to enter a new password.
user-level is ‘admin’, ‘normal’, ‘restricted’ or ‘menuing’.
switch-
character is the hex value of the ‘hot-key’ used for switching sessions.
The default is 1 (^a).
user-service select one of: csprompt, telnet, rlogin, tcp_clear, slip or ppp. For more information
on these user services see
Appendix E Summary of Line Service Types .
iphost-address (use only when you have selected a service of ‘telnet’ or ‘rlogin’); select:
0.0.0.0 for the unit to select the default host set for all users; see set server on page
173 .
255.255.255.255 for the unit to prompt the user for the ip address or name of the
host to which he/she wishes to connect
n.n.n.n (where n is a number) for any other ip address of your choosing (as system
administrator); e.g 192.65.144.6
t-port number (use only when you have selected a user-service of ‘telnet’) enter the TCP port
number of the host with which the unit should start the service. The default port is
23; in most cases you can use the default value.
callback-flag whether the unit calls the user back when he/she connects to the unit (a security
feature). Set either ‘on’ or ‘off’ (default is ‘off’). When ‘on’, enter a phone
number (see below).
phone-number a number which the unit will dial to callback the user (you must have set
‘callback’ to ‘on’). Enter the number without spaces. To change the phone number,
overwrite the previous entry.
i-timer value enter a period in seconds for which the idle timer will run. Use this timer to close a
connection because of inactivity. When the idle timer expires, if there has been no
exchange of data, the unit will end the connection. The default value is 0 (zero),
meaning that the idle timer will not expire (the connection is open permanently).
The maximum value is 2
32 seconds.
The idle timer (here) will override the idle timer which you can configure for a
line.