Black Box 16 port - Manual (Page 147)

Black Box Console Server user guide 147
add trap
user level:
admin Use this command to define communities which will receive trap messages generated
by the unit. Note that the unit does not generate any enterprise-specific traps. Up to
four trap comunities may be defined.
Syntax
a d d t r a p t r a p _ n a m e i n e t a d d r e s s
Where:
See also add community , delete trap , set contact , set location , show snmp
add user
user level:
admin This command enables you to add a new user to the system. You will be prompted to
enter a password (maximum sixteen characters). You must also set the user’s level
using the set user command.
Syntax
a d d u s e r u s e r n a m e
Where username is the required login name (maximum sixteen characters).
Menu
equivalent Users - Add User
See also delete user , set user , show user
add WINS
user level:
admin This command enables you to define the WINS (Windows Internet Naming Service)
host or hosts in your network. You can define a maximum of two hosts. If you wish,
it/they can be the same address(es) as a machine(s) already entered in the unit host
table.
Syntax
a d d W I N S i n t e r n e t _ a d d r e s s
Note ‘WINS’ must be entered in upper case. Also:
Menu
equivalent Network Configuration - WINS - Add WINS
trap_name is an arbitrary name assigned to the community.
inetaddress is the internet address that identifies the host(s) in the community.
internet address is the internet address of your machine providing the WINS; enter
the address in dot decimal notation.