Black Box 16 port - Manual (Page 180)

Black Box Console Server user guide 180
set slip line
user level:
admin Use this command to configure SLIP on a line.
syntax set slip line line_number parameter
where:
line_number may also be specified as * for all lines, or . for the current in-use line.
parameters are any from the list below:
The meanings and values of these parameters are explained in Introduction to SLIP and
PPP connections on page 74 .
You can include multiple parameters in one line of syntax (up to a maximum of 100
characters).
Menu
equivalent Line Configuration - Line Settings
See also show slip line
parameter syntax parameter name
lipaddr local ip address
ripaddr remote ip address
subnet subnet mask
mtu maximum transmission unit
priority interactive priority
transmit_parameters transmit parameters
icmp_suppress suppress icmp
vj_comp VJ compression