Barco R5976924 - Manual (Page 91)

6. Configurator, General projector settings
Image 6-20
6.8.9 Auto picture alignment
What can be done ?
The auto picture alignment function can be deactivated or activated in two ways, always executed when
sync comes back after a sync loss or executed during a file load.
How to set the auto picture alignment
1. Click on Advanced (a). (image 6-21)
The Advanced control dialog box opens.
2. Check the desired auto picture alignment setting (b)
On file
load auto picture alignment executed each time a new file is loaded.
APA off no auto picture alignment activated.
Always
always auto picture alignment activated. When sync disappears and comes back, an
auto picture alignment is executed.
R5976924 PROJECTOR TOOLSET 16/04/2009 87