Random access adjustment mode, How to change the gamma value, What can be done – Barco R9001490 User Manual
Page 64: How can it be selected, Dynamic color depth purpose
7-11
Random Access Adjustment Mode
5976072 BARCOELM R12 17012000
3
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
GAMMA = 2.2
How to change the Gamma Value ?
To change the gamma value :
1 Push the cursor key é or ê to highlight 'Gamma' (menu 1).
2 Press ENTER to select.
3 Change the gamma value by pushing the cursor key ç or è until the desired value is reached (menu 2).
4 Press EXIT to return to the Picture Tuning menu.
Default value for gamma = 2.2
Decoding EBU/IRE
Note :
Only for NTSC signals.
What can be done ?
The possibility is offered to decode the NTSC video signals via the default American IRE standard or via the European EBU standard.
Decoding a NTSC signal using the European EBU standard may result in a greenish tint.
How can it be selected ?
1 Push the cursor key é or ê to highlight 'Decoding'.
2 Press ENTER to toggle between EBU or IRE.
3 Press EXIT to return.
Select with
é
or
ê
then
menu 1
menu 3
Select with
é
or
ê
then
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
Select with
é
or
ê
then
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
0
DYNAMIC COLOR DEPTH
8
4
menu 1
Dynamic Color Depth
Purpose :
Increases color contrast for all video and data sources.
To change the dynamic color depth value :
1 Push the cursor key é or ê to highlight 'Dynamic Color Depth'.
2 Press ENTER to select.
3 Change the value by pushing the cursor key ç or è until the desired color contrast is reached.
Adjustment range : 0 ... 8
Default : 4
4 Press EXIT to return to the Picture Tuning menu.
menu 1
menu 2