Connections, How to set the input priority, Straps on module level – Barco R9001490 User Manual
Page 33

4-8
Connections
5976072 BARCOELM R12 05052000
Select with
é
or
ê
then
Select with
é
or
ê
then
A y h v t Г Г Гsy h v t Ãv
Floating
Non-Floating
-
-
-
How to set the input priority ?
1
Press ADJUST or ENTER key to start up the Adjustment mode.
2
Push the cursor key é or ê to select Installation (menu 1)
3
Press ENTER.
4
Push the cursor key é or ê to select Input Slots (menu 2)
5
Press ENTER.
2
Push the cursor key é or ê to select Video (menu 3)
3
Press ENTER to toggle between video or S-video
Straps on module level.
Floating or non-floating input.
Video input :
J11 : strap "yes" : non floating strap "no" : floating
S-Video input :
J12 : strap "yes" : non floating strap "no" : floating
J13 : strap "yes" : non floating strap "no" : floating
Factory preset : strap on, input non floating.
INPUT SLOTS
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with
é
or
ê
Slot Module type [Config]
1. RGB-SS [CV]
2. RGB-SOG
3. Video [Video]
4. Component Video
5. SDI
6. SDI
menu 1
menu 2
menu 3