Barco R9001490 - Manual (Page 47)

5-6
Getting Started
5976072 BARCOELM R12 17012000
Using the RCU
Pointing to the reflective screen
Point the front of the RCU to the reflective screen surface.
Ceiling
Screen
IR sensor
RCU
Quick On Screen Color change
For quick change of the the on-screen color of the highlighted items.
The highlighted items on the menus can be displayed in red, green or yellow.
For a quick set-up, handle as follow :
1 Press ENTER to start up the adjustment mode.
2 Push the cursor key é or ê to highlight 'Installation'.
3 Press ENTER to display Installation menu.
4 Push the cursor key é or ê to highlight 'OSD Color'.
5 Press ENTER to display the OSD color menu.
6 Push the cursor key é or ê to highlight the desired color.
7 Press ENTER to select.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
INSTALLATION
INPUT SLOTS
800 PERIPHERALS
CONFIGURATION
OSD COLOR
NO SIGNAL
INTERNAL PATTERNS
LENS
OSD COLOR
HIGHLIGHTED ITEM
RED
GREEN
YELLOW
Select with é or ê
then
to return.
Select with é or ê
then
to return.
Select with é or ê
then
to return.
menu 2 menu 1 menu 3