Barco R9001490 - Manual (Page 55)

7-2
Random Access Adjustment Mode
5976072 BARCOELM R12 17012000
Picture Service
Connecting a new Source.
Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the
most used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use.
When there is a little difference, the file can also be loaded and then edited until the source specs are reached.
So,
1 Load a file out of the list.
2 Edit this file if necessary.
3 If the projected image is not as desired, continue with Picture Tuning and Geometry.
Start up the File Service.
1 Push the cursor key é or ê to highlight 'File Service' (menu 1).
2 Press ENTER to select.
The File service menu will be displayed (menu 2).
Note : EXIT returns to the Path selection menu.
ADJUST returns to operational mode.
Possible File Manipulations.
The following file manipulations are possible :
- Load : installation of a file for a new source.
- Edit : editing a loaded file to the source specs.
- Rename : renaming a file.
- Copy : copying a file to a new file.
- Delete : deleting an existing file.
- Options : way of sorting the files & automatic file loading.
File Annotation.
xxxxXxxxx : active pixel rating
x : source number
xxx : file extension, first character is C (for custom made
files) or S (for standard files).
The second and third character is used for a following
number (=file index)
file index for custom files : 00 to 63.
xxxxxxxx : base name, 8 characters.
xxxxxxxx.xxx x xxxxXxxxxi
i or blank : i = interlaced, blank = not
interlaced
FILE SERVICE
LOAD
EDIT
RENAME
COPY
D E L E T E
OPTIONS
Select with é or ê
then
to return.
Select with é or ê
then
to return.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
menu 1 menu 2