Barco R9001490 - Manual (Page 36)

4-11
Connections
5976072 BARCOELM R12 05052000
R-Y Y B-Y S
On
98 2
793
0
8PHQPI@IUÃWD9@PÃDIQVU
Sync
Component Input Module.
What can be connected to these inputs ?
Connect your component signals (Y-luma, R-Y and B-Y), e.g. a professional VCR to the Component input module.
Blue - luma
Luma
Red - luma
WD9@PDIQVU
9,'(2 69,'(2 R G B H / C V
On
98 2 7 910
R G B H / C V
On
High Bandwidth RGB ANALOG INPUT
R G B H / C V
On
High Bandwidth 5 CABLE INPUT
OUT IN
On
984
0 1 1 0
T9DÃ9DBDU6GÃDIQVU
OUT IN
On
984
0 1 1 0
T9DÃ9DBDU6GÃDIQVU
COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN
IR-Recei ver Diagnosti c Code Green Operation
Red Stand-by
IR Sy nc OK Hardwired
remote
CTRL 1
Hardwired
remote
CTRL 2 Two way
hardwired
remote
CTRL 3
Component Video source
Gr‰ryÂsÇurÃvƒˆ‡Ã†vthy†
Component video : 4 x BNC
R-Y : 0.7 Vpp ± 3 dB
B-Y : 0.7 Vpp ± 3 dB
Y : 0.7 Vpp ± 3 dB
1 Vpp ± 3 dB if Tri-level sync on green
Composite sync : 1 Vpp to 4 Vpp ± 3 dB
All input signals are always 75 ohm terminated, even if the module is "not selected".
How to select the Component Video input :
Key in the corresponding slot number on the RCU or the local keypad.
Indication on the input slot menu :
Component Video-SS = Component video with separate sync
Component Video-SOY = Component video with sync on Y
Component Video-3LSS = Component video with 3 level separate sync
Component Video-3LSOY = Component video with 3 level sync on Y
Straps on module level :
Floating or non-floating input.
R-Y : J3 : strap "yes" : non floating strap "no" : floating
Y : J4 : strap "yes" : non floating strap "no" : floating
B-Y : J5 : strap "yes" : non floating strap "no" : floating
S : J6 : strap "yes" : non floating strap "no" : floating
Factory preset : strap "yes", non floating input
Sync selection.
J8 :
strap "no" : separate sync
strap "yes" : sync on Y.
J9 :
strap "yes" : Tri-level sync
strap "no" : normal sync.