Brocade Communications Systems Converged Enhanced Ethernet 53-1002163-02 - Manual (Page 155)

Converged Enhanced Ethernet Administrator’s Guide 133
53-1002163-02
RMON configuration and management
14
DRAFT: BROCADE CONFIDENTIAL
2. Configure the RMON event.
switch(config)#rmon event 27 description Rising_Threshold log owner john_smith
trap syslog
3. Enter the copy command to save the running-config file to the startup-config file.
switch(config)#do copy running-config startup-config
Configuring RMON history collection
The RMON collection history command collects the periodic statistical samples of RMON group
statistics on an interface for later retrieval. By default, the collection of RMON history is not
enabled. The periodic statistical samples include, but are not limited to the following items:
• Sample period
• Number of samples
• Items sampled
To enable collection history, perform the following steps from privileged EXEC mode.
1. Enter the configure terminal command to access global configuration mode.
switch#configure terminal
2. Enter the interface command to specify the CEE interface type and slot/port number.
switch(config)#interface tengigabitethernet 0/1
3. Enable the CEE interface.
switch(conf-if-te-0/1)#no shutdown
4. Activate RMON history collection for the interface.
switch(conf-if-te-0/1)#rmon collection history 1 buckets 20 interval 10 owner
john_smith
5. Return to privileged EXEC mode.
switch(conf-if-te-0/1)#exit
switch(config)#end
6. Display the RMON history.
switch#show rmon history
RMON history control entry 1
interface: ifIndex.1745682445 TengigabitEthernet 0/13
buckets requested: 20
buckets granted: 20
sampling interval: 10
Owner: jsmith
7. Enter the copy command to save the running-config file to the startup-config file.
switch#copy running-config startup-config