Neff C67M70N3GB - Manual (Page 15)

15
Switching the clock display on and off
Turn the operating mode selector back to the
Û position and
push it in.
1. Press and hold the clock function button à for a few
seconds.
The clock display is switched off. If a clock function is active,
the associated symbol remains illuminated.
2. Press and hold the clock function button à for a few
seconds.
The clock display switches on.
Minute minder
1. Press the clock function button à repeatedly until the KJ
and Q symbols light up.
2. Use the rotary selector to set the cooking time (e.g. † : ‹‹
minutes).
The setting is applied automatically. Afterwards, the clock is
displayed again and the timer counts down.
Cooking time
Automatic switch off after a certain period of time.
1. Set the operating mode and temperature.
2. Press the clock function button à repeatedly until the KJ
and x symbols light up.
3. Set the cooking time using the rotary selector
(e.g. ‚ : „‹ hours).
4. Press the ƒ button.
The appliance heats up.
5. Turn operating mode selector to Û position and press in.
Once operation time has elapsed, the appliance switches off
automatically.
End of operation
Automatic switch-off at a set time.
1. Set the operating mode and temperature.
2. Press the clock function button à repeatedly until the KJ
and y symbols light up.
3. Set the end of operation using the rotary selector
(e.g. ‚ƒ : „‹ ).
4. Press the ƒ button.
The appliance switches off automatically at the time that has
been set for the end of operation.
5. Turn operating mode selector to Û position and press in.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the clock functions for cooking
time x and end of operation y .
1. Set the operating mode and temperature.
2. Press the clock function button à repeatedly until the KJ
and x symbols light up.
3. Set the cooking time using the rotary selector
(e.g. ‚ : „‹ hours).
4. Press the clock function button à repeatedly until the KJ
and y symbols light up.
5. Set the end of operation using the rotary selector
(e.g. ‚ƒ : „‹ ).
6. Press the ƒ button.
The appliance waits until the appropriate time to switch on (in
the example shown, ‚‚ : ‹‹ ).
The appliance switches off automatically at the time set for
the end of operation ( ‚ƒ : „‹ ). A signal sounds and the y
symbol flashes.
7. Turn operating mode selector to Û position and press in.
Setting the clock
1. Press the clock function button à repeatedly until the KJ
and 3 symbols light up.
2. Turn the rotary selector to set the current time.
The setting is applied automatically.
Changing the clock
e.g. from British Summer Time to Greenwich Mean Time.
Make the settings as described in steps 1 and 2.