Neff C67M70N3GB - Manual (Page 14)

14
Memory
Memory gives you the option to store your own settings and
call them up again at the press of a button. There are six
memory locations available. The memory function is useful for
recipes which you prepare particularly frequently.
In this section, you can read about
■
how to save the memory
■
how to start the memory
Saving settings in the memory
Requirement: the operating mode selector must not be pushed
in.
1. Set the operating mode, temperature and cooking time for
the meal you wish to cook or select a programme. Do not
start.
2. Press the l button.
“Memory 1 ­ free” appears.
3. Using the operating mode selector, select one of the six
memory locations.
4. Press and hold the l button, a signal sounds and “Memory
saved” appears.
Starting the memory
You can start cooking at any time using the settings saved for
your meal.
Requirement: the operating mode selector must not be pushed
in.
Place your food in the cooking compartment.
1. Press and release the l button and use the rotary selector
to select the memory location.
The stored settings are displayed. If “Memory location empty”
appears, no setting has been saved in this memory location
yet.
2. Press the ƒ button.
The memory setting starts.
Changing the memory location
Once operation has started, you can no longer change the
memory location.
Changing the settings
This can be done at any time. The setting you originally saved
appears the next time you start the memory.
Electronic clock
Your appliance has various clock functions.
In this section, the following are explained:
■
The clock display
■
How to set the timer
■
How to switch off your appliance automatically (cooking time
and end of operation)
■
How to switch your appliance on and off automatically
(preselection mode)
■
How to set or change the clock.
Clock display
Notes
■
Between the times ƒƒ : ‹‹ and † : †Š the clock display is
dimmed if you do not make any settings in that period or no
clock function is activated.
■
When using the minute minder Q , cooking time x , end
time y and preselection mode clock functions, a signal
sounds and the corresponding symbol flashes when the set
time has expired. To stop the audible signal early, press the
clock function button.
■
You can check your settings at any time. Press the clock
function button repeatedly until the corresponding symbol
lights up.
■
If you wish to cancel a setting, turn the set time back to ‹ : ‹‹
and switch the appliance off.
■
The setting can be corrected using the rotary selector if
necessary.
&ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU
Clock function Use
Q Timer You can use the minute minder as an egg timer or a kitchen timer. The appliance does
not switch on or off automatically
x Cooking time The appliances switches off automatically after a cooking time setting has elapsed
(e.g. ‚ : „‹ hours)
y End of operation The appliance switches off automatically at a set time (e.g. ‚ƒ : „‹ )
Preset operation The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
3 Clock Setting the clock
f Rapid heat up Shortens the heat up time