Nokia 6620 - Manual (Page 64)

Nokia 6620 User Guide 53 Copyright © 2004 Nokia
Messaging
Text messages
Select Messaging > Options > Settings > Text message to open the following list
of settings:
Message centers—Lists all the message centers that have been defined.
Msg. center in use (message center in use)—Defines which message center is used
for delivering text messages and smart messages such as picture messages.
Options when editing message center settings are Edit , New msg. center , Delete ,
Help , and Exit .
Receive report (delivery report)—When this network service is set to Yes, the status
of the sent message (Pending, Failed, or Delivered) is shown in the reports.
Message validity—If the recipient of a message cannot be reached within the
validity period, the message is removed from the message service center. Note that
the network must support this feature. Maximum time is the maximum amount
of time allowed by the network.
Message sent as—The options are Text, Fax, Paging, and E-mail. For further
information, contact your network operator. Change this option only if you are sure
that your message center is able to convert text messages into these other formats.
Preferred connection—You can send text messages over the normal GSM network
or by GPRS, if supported by the network.
Reply via same ctr. (network service)—By setting this option to Yes, if the recipient
replies to your message, the return message is sent using the same message service
center number. Note that this may not work between all operators.
Multimedia messages
Select Messaging > Options > Settings > Multimedia message to open the
following list of settings:
Access point in use—Select which access point is used as the preferred connection
for the multimedia message center. See "Settings needed for multimedia
messaging" on page 47.
If you receive multimedia message settings in a smart message and save them,
the received settings are automatically used for the access point. See "Smart
messages" on page 48.
Multimedia reception—Select from the following:
• Only in home net. if you want to receive multimedia messages only when
you are in your home network. When you are outside your home network,
multimedia message reception is turned off.
• Always on if you always want to allow the reception of multimedia messages.