View messages on a sim card, Cell broadcast (network service), Service command editor – Nokia 6620 User Manual
Page 63: Messaging settings

52
Copyright © 2004 Nokia
Waiting or Queued—When there are two similar types of messages in Outbox, one
of them is waiting until the first one is sent.
Resend at (time)—Sending has failed. The phone will try to send the message again
after a time-out period. Press Send if you want to restart the sending immediately.
Deferred—You can set documents to be on hold while they are in Outbox. Scroll
to a message that is being sent, and select Options > Defer sending.
Failed—The maximum number of sending attempts has been reached. If you were
trying to send a text message, open the message and check that the sending settings
are correct.
• VIEW MESSAGES ON A SIM CARD
Select Messaging > Options > SIM messages.
• CELL BROADCAST (NETWORK SERVICE)
Select Messaging > Options > Cell broadcast.
You may be able to receive messages on various topics, such as weather
or traffic conditions, from your service provider. For available topics and relevant
topic numbers, contact your service provider. In the main view you can see:
•
The status of the topic:
for new, subscribed messages and
for new,
unsubscribed messages.
•
The topic number, topic name, and whether it has been flagged (
) for
follow-up. You will be notified when messages belonging to a flagged topic
have arrived.
Options in Cell broadcast are
Open
,
Subscribe
or
Unsubscribe
,
Hotmark
or
Unhotmark
,
Topic
,
Settings
,
Help
, and
Exit
.
Note: A packet data (GPRS) connection may prevent cell broadcast
reception. Contact your network operator for the correct GPRS settings.
See "GPRS" on page 61.
• SERVICE COMMAND EDITOR
Select Messaging > Options > Service command. Key in and send
service requests (also known as USSD commands) for network services
to your service provider (for example, a request for activation commands).
• MESSAGING SETTINGS
Messaging settings have been divided into groups according to the different
message types. Scroll to the settings you want to edit and press the joystick.