Nokia 6620 - Manual (Page 109)

98 Copyright © 2004 Nokia
2 The user of the receiving device activates the IR port.
To activate your phone IR port to receive data, select Menu > Connect. >
Infrared and press the joystick.
3 The user of the sending device selects the desired IR function to start data transfer.
To send data by IR, select Options > Send > Via infrared in an application.
If data transfer is not started within one minute after the activation of the IR port,
the connection is cancelled and must be started again.
If you are using Windows 2000 and you want to use IR to transfer files between
your phone and a compatible computer, open the Control Panel and select Wireless
Link. In the Wireless Link File Transfer tab, check the box for “Allow others to send
files to your computer using IR.”
Check infrared connection status
When blinks, your phone is trying to connect to the other device or a
connection has been lost.
When is shown continuously, the IR connection is active and your phone is
ready to send and receive data by its IR port.
• USB CONNECTION
You can use the Connectivity Cable DKU-2 to connect your Nokia 6620 phone to
the USB port on your computer. Before using the connectivity cable, you must
install the cable driver prior to PC Suite installation. Carefully follow the installation
instructions given in the User’s Guide for Nokia PC Suite and the Quick Guide for
Installing DKU-2 (USB) Drivers on the CD-ROM supplied with the phone.
Note: Making or answering phone calls during a computer connection is
not recommended because it might disrupt the operation.
• CONNECTION MANAGER
Select Menu > Connect. > Conn. mgr.