Nokia 6620 User Manual

Page 39

Note: You must say the name exactly as you said it when you recorded it.
This may be difficult in a noisy environment or during an emergency, so
you should not rely solely upon voice dialing in all circumstances.

ADD A VOICE TAG TO A PHONE NUMBER

Voice tags can only be added to phone numbers stored in phone memory. See "Copy
between SIM card and phone memory" on page 27.

In Contacts, scroll to the contact to which you want to add a voice tag, and
press the joystick to open the contact card.

Scroll to the number to which you want to add the voice tag, and select
Options > Add voice tag.

Press Start to record a voice tag.

After the starting tone, clearly say the words you want to use as a voice tag.

After recording, the phone plays the recorded tag and Playing voice tag
is displayed.

When the voice tag has been successfully saved, Voice tag saved is displayed and
a beep sounds. A symbol

can be seen next to the number in the contact card.

To replay, erase, or change a voice tag, scroll to the item that has a voice tag
(indicated by

), and select Options > Voice tag > Playback, Delete, or Change.

MAKE A CALL USING A VOICE TAG

In the standby mode, press and hold the Right selection key.

A short tone is played and Speak now is displayed.

When you make a call using a voice tag, hold the phone at a short distance
from your mouth, and say the voice tag clearly.

The phone plays the original voice tag, displays the name and number, and
dials the number of the recognized voice tag.

If the phone plays the wrong voice tag or if you want to retry voice dialing, press Retry.

Voice dialing should not be used when a data call or a GPRS connection is active
because the voice call will interrupt the connection.