Nokia N71 - Manual (Page 92)

Tools
91 Copyright © 2006 Nokia. All rights reserved.
• Internet access point (IAP) to send and receive e-mail
and connect to the Internet
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
Access points
You may receive access point settings in a message from
a service provider. See ‘Data and settings’, p. 41. Some or
all access points may be preset for your device by your
service provider or network operator, and you may not be
able to change, create, edit, or remove them.
indicates
a protected access point.
indicates a packet data access point.
To create a new access point, select Options > New
access point . To edit the settings of an access point,
select Options > Edit . Follow the instructions from your
service provider.
Connection name —Enter a descriptive name for the
connection.
Data bearer —Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can
be left empty, unless you have been instructed otherwise
by your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
Access point name —Obtain the access point name from
your network operator or service provider.
User name —The user name may be needed to make a data
connection, and is usually provided by the service provider.
Prompt password —If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select
Yes .
Password —A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication —Define the level of authentication:
Normal or Secure .
Homepage —Depending on the access point you are setting
up, enter the Web address or the address of the multimedia
messaging center.
Select Options > Advanced settings to change the
following settings: