Email, E-mail, Messaging – Nokia N71 User Manual
Page 47
Messaging
46
Copyright © 2006 Nokia. All rights reserved.
Press ,
and
select
Messag.
>
Options
>
Settings
>
E-
and from the following:
Mailboxes
—Select a mailbox to change
Connection
settings
,
User settings
,
Retrieval settings
, and
Automatic retrieval
.
Mailbox in use
— Select which mailbox you want to use for
sending e-mail.
To create a new mailbox, select
Options
>
New mailbox
in
the mailbox main view.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail
and from the following:
User name
—Enter your user name, given to you by your
service provider.
Password
—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail serv.
—Enter the IP address or host name of
the mail server that receives your e-mail.
Access point in use
—Select an Internet access point (IAP).
Mailbox name
—Enter a name for the mailbox.
Mailbox type
—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are
POP3
and
IMAP4
. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
e-mail messages are not updated automatically when you
are online. To see the latest e-mail messages, you must
disconnect and make a new connection to your mailbox.
Security (ports)
—Select the security option used to
secure the connection to the remote mailbox.
Port
—Define a port for the connection.
APOP secure login
(for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail
and from the following:
My e-mail address
—Enter the e-mail address given to you
by your service provider. Replies to your messages are sent
to this address.
Outgoing mail serv.
—Enter the IP address or host name of
the mail server that sends your e-mail. You may only be
able to use the outgoing server of your network operator.
Contact your service provider for more information.
Access point in use
—Select an Internet access point (IAP).