Nokia N71 - Manual (Page 85)

Connectivity
84 Copyright © 2006 Nokia. All rights reserved.
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC or devices that belong to someone you
trust.
indicates authorized devices in the paired
devices view.
Set as unauthorised —Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete . If you want to cancel all pairings, select
Options > Delete all .
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately, and the connection is switched off.
Receive data
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
is shown, and the item is
placed in the Inbox folder in Messag. . Messages received
through Bluetooth connectivity are indicated by . See
‘Inbox—receive messages’, p. 40.
Switch off Bluetooth connectivity
To switch off Bluetooth connectivity, select Bluetooth >
Off .
Infrared connection
With infrared (IR), you can transfer data such as business
cards, calendar notes, and media files with a compatible
device.
Do not point the IR beam at anyone's eye or allow it to
interfere with other IR devices. This device is a Class 1 laser
product.
Send and receive data:
1 Make sure that the IR ports of the sending and
receiving devices are pointing at each other, and that
there are no obstructions between the devices. The
preferable distance between the two devices is up to
1 meter (3 feet).
2 The user of the receiving device activates the IR port.
To activate the IR port of your device to receive data,
press
, and select Connect. > Infrared .
3 The user of the sending device selects the desired IR
function to start the data transfer.
To send data, locate the desired file in an application or
the file manager, and select
Options > Send > Via
infrared .
If data transfer is not started within 1 minute after the
activation of the IR port, the connection is cancelled and
must be started again.