Nokia N71 - Manual (Page 90)

Tools
89 Copyright © 2006 Nokia. All rights reserved.
Left selection key —Assign a shortcut to ( ) in the
standby mode.
Right selection key —Assign a shortcut to ( ) in the
standby mode.
Active standby apps. —Select the application shortcuts
you want to appear in the active standby. This setting is
only available if
Active standby is on.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the
Active standby is on.
Operator logo —This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Display
Brightness —Adjust the basic brightness level of the
display to lighter or darker. However, in extreme light
conditions, the brightness of the display is automatically
adjusted.
Power saver time-out —Select the time-out period after
which the power saver is activated.
Light time-out —Select a time-out after which the
backlight of the display is switched off.
Cover display settings
Brightness —You can change the brightness of the cover
display to lighter or darker. Changing the brightness of the
cover display does not affect the brightness of the main
display.
Wallpaper —Select and crop a background image, and set
how time is displayed on the cover display in the standby
mode.
Screen saver —Select the cover display power saver type,
its time-out period, and if an image or an animation screen
saver is shown after the time-out period before the power
saver is activated.
Answer if fold opened —Select On to answer calls by
opening the cover.
Call settings
Send my caller ID —You can set your phone number to be
displayed to ( Yes ) or hidden from ( No ) the person to whom
you are calling, or the value may be set by your network
operator or service provider when you make a subscription
(
Set by network ) (network service).
Call waiting —If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on