Nokia N71 - Manual (Page 61)

Contacts (phonebook)
60 Copyright © 2006 Nokia. All rights reserved.
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1 In the address book, select a contact, and press .
2 Select Options > Defaults .
3 Select a default to which you want to add a number or
an address, and select
Assign .
4 Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact
card.
Copy contacts
To copy names and numbers from a SIM card to your
device, press
, and select Contacts > Options > SIM
contacts > SIM directory . Select the names you want to
copy and Options > Copy to Contacts .
To copy contacts to your SIM card, press , and select
Contacts . Select the names you want to copy and
Options > Copy to SIM direct. ; or select Options >
Copy > To SIM directory . Only the contact card fields
supported by your SIM card are copied.
Tip! You can synchronize your contacts to a
compatible PC with Nokia PC Suite.
SIM directory and services
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider, network operator, or other vendor.
Press , and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dialling contacts . This setting is
only shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select
Options > Activ. fixed dialling . To add
new numbers to the fixed dialing list, select Options >
New SIM contact . You need the PIN2 code for these
functions.
When you use Fixed dialling , packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be
included on the fixed dialing list.