Usb fdd kit, Connecting the usb floppy disk drive – Toshiba Tecra M9 User Manual
Page 73
User’s Manual
3-31
M9
Please refer to Chapter 5,
, for further details on using hot
keys to change the display setting.
USB FDD Kit
The USB floppy disk drive accommodates either a 1.44 MB or 720 KB
floppy disk and connects to one of the computer’s USB ports.
The USB floppy disk drive
Connecting the USB floppy disk drive
To connect the drive, plug the floppy disk drive’s USB connector into a
computer’s USB port.
Connecting the USB floppy disk drive
Do not disconnect the external monitor while in Sleep or Hibernation Mode.
Turn off the computer before disconnecting the external monitor.
Eject button
Floppy disk slot
Disk-In-Use Indicator
USB connector
Make sure the connector is properly aligned with the socket. Do not try to
force the connection, doing so can damage the connecting pins.
USB connector
USB port
If you connect the USB floppy disk drive after the computer has already
been turned on, it will take about ten seconds for it to be recognized by the
computer. Do not attempt to disconnect and reconnect the drive before this
period has elapsed.