Toshiba Tecra M9 - Manual (Page 72)

3-30 User’s Manual
M9
3. Close the lid and slide the lock to the lock position.
Closing the lid
For details on inserting the Ultra Slim Bay HDD Adaptor in the computer’s
Ultra Slim Bay slot, refer to Chapter 4,
Operating Basics .
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps as detailed below:
Connecting the monitor cable
1. Turn the computer’s power off.
2. Connect the monitor cable to the external monitor port.
Connecting the monitor cable to the external monitor port
3. Turn the external monitor’s power on.
4. Turn the computer’s power on.
When you turn on the power, the computer will automatically recognize the
monitor and determine whether it is a color or monochrome device. In the
event that you find that there are issues getting an image displayed on the
correct monitor, you should consider using the Fn + F5 hot key to change
the display settings (if you then disconnect the external monitor before you
turn the computer’s power off, be sure to press Fn + F5 hot key again to
switch to the internal display).
Lid
External monitor port
Monitor cable