Toshiba Tecra M9 User Manual
Page 146
7-6
User’s Manual
M9
Power will be automatically turned on when a signal is received from an
administrator’s computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorter than the times listed in this manual
when this function is enabled. Refer to the section in chapter 6,
On Battery
The following settings can be changed when the Wake-up on LAN is
Enabled.
Built-in LAN
This feature enables or disables the Built-in LAN.
Device Config
Device Configuration
This option allows you to set how the computer’s hardware devices will be
configured.
Enabled
Enables Wake-up on LAN.
Disabled
Disables Wake-up on LAN (Default).
Enabled
Enables Wake-up on LAN function when
operating from the battery.
Disabled
Disables Wake-up on LAN function when
operating from the battery (Default).
Enabled
Enables Built-in LAN functions (Default).
Disabled
Disables Built-in LAN functions.
All Devices
The computer’s BIOS will setup and configure all
devices.
Setup by OS
The operating system will setup and configure all
of the devices that it can control (default).