Toshiba Magnia 550d - Manual (Page 78)

Item Explanation
System
Monitors the system information
-Processor Time- Monitors the use ratio of the CPU.
-Processor Queue
Length- Monitors the Processor's waiting queue.
-Total Interrupts/sec-- Monitors the interrupt frequency of the hardware.
Memory Monitors the memory information.
-Available Bytes- Monitors the number of usable bytes of the physical memory.
-Page Faults/sec- Monitors the number/seconds of the page faults.
-Pool Nonpaged Peak- Monitors the maximum number of bytes of a Nonpaged pool that the
server used at a certain moment.
-% Committed Bytes In
Use- Monitors the committed size of virtual memory
-Pool Nonpaged Bytes- Monitors the number of Pool Nonpaged Bytes; the system memory area
for the objects that exist in the physical memory without writing them to
the disk.
-Pool Paged Bytes- Monitors the number of Pool Paged Bytes; the system memory area for
the objects which are enabled to be written when it is not in use.
Disk Monitors the disk information.
-The occupied size of
Logical Drive- Monitors the used volume of the disk for each fixed drive.
Network Monitors the network information.
-Server Sessions- Monitors the number of server sessions.
-Work Item Shortages- Monitors the frequency that STATUS_DATA_NOT_ACCEPTED is
returned during the receiving display time.
-Bytes Total/sec- Monitors the number of bytes that are sent between the server and
network.
-Current Commands- Monitors the demand numbers which are in the queue to wait operation.
-Reads Denied/sec- Monitors the speed that the server denies receiving demand for Raw
reading.
-Writes Denied/sec- Monitors the speed that the server denies receiving demand for Raw
writing.
-Packets Received/sec- Monitors the numbers/seconds of the packets received per network
adapter.
-Packets Sent/sec- Monitors the numbers/seconds of the packets sent per network adapter.
Memo In case of the following condition, the Performance function writes in an event
log.
[Watch this item] check box in the performance set up screen is checked.
[Write Event Log] check box is checked.
Each value continues exceeding Alert Level specified in this screen.
66