Toshiba Magnia 550d - Manual (Page 114)

1.3 Guest Configuration Procedure
Selecting “Network,” “Properties,” and then “Protocols” tab
Open [Network] [Properties] and then click the [Protocols] tab.
Click the [Add] button.
Select Network Protocol window
In the [Select Network Protocol] window, select [Point To Point Tunneling Protocol] in [Network
Protocol], and click [OK].
PPTP Configuration window
Set [Number of Virtual Private Networks], and click [OK].
In the [Setup Message] dialog box, click [OK].
Add RAS Device window
From the [Add RAS Device] window, select [RAS Capable Devices] and then click [OK].
Remote Access Setup window
Click [Configure].
Configure Port Usage window
In the [Configure Port Usage] window, select the [Dial out only] check box of [Port Usage], and then
click [OK]
Remote Access Setup window
In the [Remote Access Setup] dialog box, click [Network].
Network Configuration window
In the [Network Configuration] window, select the [TCP/IP] check box of [Dial Out Protocols], and
then click [OK].
Remote Access Setup window
In the [Remote Access Setup] dialog box, click [Continue].
102