Removing the reserve pen (optional), Inserting the reserve pen – Toshiba Tecra M4 User Manual
Page 79
TECRA M4
4-7
Operating Basics
Removing the Reserve Pen (optional)
Remove the Reserve Pen as described below.
1. Remove the battery pack.
2. Pull the insulator and detach the Reserve Pen from the Pen holder (
➀)
and remove the Reserve Pen (
➁).
Removing the Reserve Pen
3. Reinstall the battery pack.
Inserting the Reserve Pen
1. Remove the battery pack.
2. Gently push the Reserve Pen into the pen holder to insert it.
Inserting the Reserve Pen
3. Reinstall the battery pack.
Do not use the broken pen tip. When it breaks, replace it with a refill
delivered with the Tablet PC Pen. Use of the broken pen tip may cause
scratches on the LCD display panel. When the reserve refills have run out,
purchase a new pen set from a TOSHIBA dealer.
Reserve Pen
Insulator
Refer to the
section in Chapter 6, Power and
Power-Up Modes for more information on how to remove and reinstall the
battery pack.
Pen holder
Reserve Pen
Refer to the
section in Chapter 6, Power and
Power-Up Modes for more information on how to remove and reinstall the
battery pack.