Toshiba Tecra M4 - Manual (Page 154)

TECRA M4 7-8
HW Setup
USB-FDD Legacy Emulation
Use this option to enable or disable USB-FDD Legacy Emulation.
USB Memory BIOS Support Type
Set the type of the USB memory as a startup device.
Button Setting
Standby
Set this option for high speed recovery from the Standby mode.
Enabled
Enables the USB-FDD Legacy Emulation
(Default).
Disabled
Disables the USB-FDD Legacy Emulation.
HDD
Set the type of the USB memory to be equivalent
to the HDD (Default).
* Based on the [HDD] order in the [Boot Priority
Options] item. The order with respect to the other
HDD can be set in the [HDD Priority Options]
item.
FDD
Set the type of the USB memory to be equivalent
to the FDD.
* Based on the [FDD] order in the [Boot Priority
Options] item.
Fast
Recover from the Standby mode at high speed.
Please ensure that the AC adaptor is connected
when selecting this mode.
Normal
Recover from Standby mode at normal speed.