Toshiba Tecra M4 - Manual (Page 171)

TECRA M4 8-13
Optional Devices
3. Close the lid and slide the lock to the lock position.
Closing the lid
For details on inserting the Slim Select Bay HDD adaptor in the computer’s
Slim Select Bay slot, refer to Chapter 4, Operating Basics .
USB FDD Kit
The USB floppy disk drive module can be connected to a USB port. For
details on connecting the USB floppy disk drive module, refer to Chapter 4,
Operating Basics .
Tablet PC Pen
Use it as a spare to your computer. Spare pen tip and draw-out tool are
included. Refer to Chapter 6, Power and Power-Up Modes , for the detailed
usage.
Reserve Pen
Supplied pen uses a pen instead of Supplied pen at the time of loss or
breakage. The pen is set inside the computer, which connects a battery
pack. Refer to Chapter 6, Power and Power-Up Modes , for the detailed
usage.
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
1. Turn the computer’s power off.