Power indicators, Battery indicators, Dc in indicator – Toshiba Portege R200 (PPR20) User Manual
Page 97: Power indicators -4, Battery indicators -4 dc in indicator -4
PORTÉGÉ R200
6-4
Power and Power-Up Modes
Power indicators
As shown in the above table, the Battery, DC IN and Power indicators on
the system indicator alert you to the computer’s operating capability and
battery charge status.
Battery indicators
Check the Battery indicator to determine the status of the battery pack.
The following indicator lights indicate the battery status:
DC IN indicator
Check the DC IN indicator to determine the power status with the AC
adaptor connected:
Flashing orange
The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Orange
Indicates the AC adaptor is connected and
charging the battery.
Blue
Indicates the AC adaptor is connected and the
battery is fully charged.
No light
Under any other conditions, the indicator does
not light.
If the battery pack becomes too hot while it is being charged, the charge
will stop and the Battery indicator will go out. When the battery pack’s
temperature falls to a normal range, charge will resume. This occurs
whether the computer’s power is on or off.
Blue
Indicates the AC adaptor is connected and
supplying proper power to the computer.
Flashing orange
Indicates a problem with the power supply. Plug
the AC adaptor into another power outlet. If it still
does not operate properly, contact your dealer.
No light
Under any other conditions, the indicator does not
light.