Toshiba Portege R200 (PPR20) - Manual (Page 121)

PORTÉGÉ R200 7-7
HW Setup
Configuring the Execute-Disable Bit Capability and
TPM
The configurations for the Execute-Disable Bit Capability and TPM are
carried out in the BIOS setup program.
HDD
Set the type of the USB memory to be equivalent
to the HDD (Default).
* Based on the [HDD] order in the [Boot Priority
Options] item. The order with respect to the other
HDD can be set in the [HDD Priority Options]
item.
FDD
Set the type of the USB memory to be equivalent
to the FDD.
* Based on the [FDD] order in the [Boot Priority
Options] item.
Notes before using the BIOS Setup
■ In normal cases, changes in system configuration should be made in
Windows using TOSHIBA HW Setup, TOSHIBA Password Utility,
TOSHIBA Power Saver, Device Manager, etc.
If the configuration in the BIOS setup program is different from the
configuration in the Windows utility, the configuration in the Windows
utility takes priority.
■ Depending on the system, changes made to the system configuration
might not be reflected.
■ The settings in the BIOS setup program are not erased even if the
power supply is switched off. However, if the built-in battery (RTC
battery) runs out of power, the settings will revert back to their default
values.
The following item does not revert back to their default values.
■ Password
■ HDD Password
■ Security controller