Toshiba Portege R200 (PPR20) - Manual (Page 116)

PORTÉGÉ R200 7-2
HW Setup
General
This window displays the BIOS version and contains two buttons: Default
and About.
Setup
This field displays BIOS Version and date.
Display
This tab lets you customize your computer’s display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you use the display to be used when the computer is booted. (This
setting is only available on Standard VGA mode and not available on
Windows Desktop)
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer. Select from the
following settings:
Default
Returns all HW Setup values to the factory
settings.
About
Displays the HW Setup version.
Auto-Selected
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
LCD + Analog RGB
Selects both the internal LCD and external
monitor for simultaneous display.
HDD
−> FDD −>
CD-ROM
−> LAN
The computer looks for bootable files in the
following order: HDD, floppy disk drive* 1 ,
CD-ROM* 2 and LAN (Default).
FDD
−> HDD −>
CD-ROM
−> LAN
The computer looks for bootable files in the
following order: floppy disk drive* 1 , HDD,
CD-ROM* 2 and LAN.
HDD
−> CD-ROM −>
LAN
−> FDD
The computer looks for bootable files in the
following order: HDD, CD-ROM* 2 , LAN and
floppy disk drive* 1 .
FDD
−> CD-ROM −>
LAN
−> HDD
The computer looks for bootable files in the
following order: floppy disk drive* 1 , CD-ROM* 2 ,
LAN and HDD.