Toshiba Portege R200 (PPR20) - Manual (Page 108)

PORTÉGÉ R200 6-15
Power and Power-Up Modes
Installing the battery pack
To install a battery pack, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Close the LCD display panel and turn the computer upside down.
4. Insert the battery pack.
Securing the battery cover
5. Return your computer to the upright position.
Do not touch the battery release latch while holding the computer. Or you
may get injured by the dropped battery pack by unintentional release of the
battery release latch.
Battery pack