Toshiba Portege R200 (PPR20) - Manual (Page 41)

PORTÉGÉ R200 2-9
The Grand Tour
LCD screen The LCD screen displays high-contrast text and
graphics. The computer’s XGA screen consists
of 1024 × 768 pixels. Refer to Display Controller
and Modes in Appendix B.
When the computer operates on the AC adaptor
the LCD screen’s image will be somewhat
brighter than when it operates on battery power.
The lower brightness level is intended to save
battery power.
LCD Sensor switch This switch senses when the computer’s LCD
display panel is closed or opened and activates
the Panel Power Off/On feature. When you close
the LCD display panel the computer enters
Hibernation mode and shuts down. When you
open the computer’s LCD display panel the
computer starts in Hibernation mode. Use the
TOSHIBA Power Saver Utility to enable or
disable this feature. The default is “enabled”.
Refer to the TOSHIBA Power Saver Utility and
Panel Power Off/On items in Chapter 1, Special
features , for details on settings.
Do not put a magnetic object close to the switch. The computer will
automatically enter Hibernation mode and shut down even if the Panel
Power Off features is disabled.
TouchPad A TouchPad located in the centre of the palm rest
is used to control the on-screen pointer. Refer to
the Using the Touch Pad section in Chapter 4,
Operating Basics.
TouchPad control
buttons
Control buttons below the TouchPad let you
select menu items or manipulate text and
graphics designated by the on-screen pointer.
Internal Microphone A built-in microphone lets you record sound into
your applications. Refer to the Using the
microphone section in Chapter 4, Operating
Basics.
Power button Press the power button to turn the computer’s
power on and off.