Removing memory module, Removing memory module -8 – Toshiba Portege R200 (PPR20) User Manual

Page 131

PORTÉGÉ R200

8-8

Optional Devices

7. Seat the memory module cover and secure it with one screw.

Seating the memory module cover

8. Install the battery pack. Refer to

section in

Chapter 6, Power and Power-Up Modes, for details.

9. Return your computer to the upright position.
10. Turn the computer power on and make sure the added memory is

recognized.

Click start, click Control Panel, click Performance and Maintenance

and select the System icon. Open System Properties window and

click General tab.

Removing memory module

To remove the memory module, make sure the computer is in boot mode

then:
1. Set the computer to boot mode and turn the computer’s power off.

Make sure the Power indicator is off.

2. Remove AC adaptor and all cables connected to the computer.
3. Turn the computer upside down and remove the battery pack. Refer to

section in Chapter 6, Power and Power-Up

Modes, for details.

4. Loose a screw securing the memory module cover. The screw is

attached to the cover to prevent it from being lost.

5. Slide your fingernail or a thin object under the cover and lift it off.
6. Push the latches to the outside to release the module. A spring will

force one end of the module up.

Be sure that the cover is closed firmly.