Toshiba Qosmio G20 (PQG20) - Manual (Page 167)

User’s Manual 9-3
Optional Devices
Removing a PC card
To remove the PC card, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to PC card and click.
3. Press the PC card eject button to extend it.
4. Press the PC card eject button to pop the PC card out slightly.
5. Grasp the PC card and draw it out.
Removing the PC card
ExpressCard
The computer is equipped with an ExpressCard slot. Any ExpressCard
that meets industry standards (manufactured by TOSHIBA or other vendor)
can be installed. The slot supports hot plug connection and utilizes the
PCI-Express interface that supports the reading and writing of data at a
theoretical maximum rate of 2.5Gbps.
Inserting an ExpressCard
The ExpressCard slot is located on the right side of the computer.
Windows’ hot-install feature lets you insert an ExpressCard while the
computer’s power is on.
If the PC card is not inserted all the way, the eject button may not pop out.
Be sure to push the PC card firmly and press the eject button again.
PC card eject
button
PC card
■ Do not insert a ExpressCard while the computer is in standby or
hibernation mode. Some cards might not work properly.
■ The ExpressCard slot is the top slot of the two located on the right of
the computer. Please confirm this with the following illustration, avoid
confusion with the PC Card slot and insert the card carefully.