Toshiba Qosmio G20 (PQG20) - Manual (Page 164)

8-30 User’s Manual
Using the Remote Controller, Front operation panel and QosmioPlayer
■ Windows sounds are still heard even when the mode has been
switched to Monitor-in.
■ Fn + F1/Fn + F5 hot keys are not available.
■ In Monitor-in mode, the screens of other applications will be invisible.
This may cause you to operate an application incorrectly by pressing a
mouse button or any key on the keyboard.
To prevent operational errors, it is recommended to perform the
following:
■ Close any applications running on your system.
■ Do not touch the mouse or keyboard.
■ The Monitor-in button will remain disabled for about 30 seconds
immediately after power-on or after returning from Standby or
Hibernation mode.
■ Do not turn off the power while the Monitor-in mode is active. Be sure
to turn off the power only after switching back to either Windows or
QosmioPlayer.
■ When you connect the Monitor-in cable to the Monitor-in port, audio
data from the input device will be played through the speakers on your
computer - this is because the Monitor-in port also works as a line-in
port. Should this occur, right-click the Volume icon on the Task Bar and
select the Open Volume Control option from the menu that appears.
Turn on the Mute checkbox in the Line In section of the Volume
Control window.