Toshiba Qosmio G20 (PQG20) - Manual (Page 121)

User’s Manual 6-13
Power
Installing the battery pack
To install a battery, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Close the LCD display panel and turn the computer upside down.
4. Fit the battery pack into the battery cover.
Attach the battery pack in a battery cover
5. Insert the battery pack together with the battery cover.
Securing the battery pack
■ The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
■ Do not touch the release latch while holding the computer - this may
cause the battery pack to be unintentionally released which may result
in injury or damage.
Battery pack
Battery cover
Battery pack