Toshiba Qosmio G20 (PQG20) - Manual (Page 127)

User’s Manual 7-3
HW Setup
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
*1 Only on models with two hard disk drives installed.
*2 In this computer, CD-ROM refers to the optical media drive.
To change the boot device, follow the steps below.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons:
Built-in HDD1, Built-in HDD2, CD-ROM, FDD, Network (LAN), boot.
HDD
−>
FDD
−>
CD-ROM
−>
LAN
The computer looks for bootable files in the
following order: HDD, floppy disk drive, CD-ROM
and LAN. (Default)
FDD
−>
HDD
−>
CD-ROM
−>
LAN
The computer looks for bootable files in the
following order: floppy disk drive, HDD, CD-ROM
and LAN.
HDD
−>
CD-ROM
−>
LAN
−>
FDD
The computer looks for bootable files in the
following order: HDD, CD-ROM, LAN and floppy
disk drive.
FDD
−>
CD-ROM
−>
LAN
−>
HDD
The computer looks for bootable files in the
following order: floppy disk drive, CD-ROM, LAN
and HDD.
CD-ROM
−>
LAN
−>
HDD
−>
FDD
The computer looks for bootable files in the
following order: CD-ROM, LAN, HDD, floppy disk
drive.
CD-ROM
−>
LAN
−>
FDD
−>
HDD
The computer looks for bootable files in the
following order: CD-ROM, LAN, floppy disk drive
and HDD.
U Selects the USB floppy disk drive.
N Selects the network.
1 Selects the primary HDD1.
2 Selects the primary HDD2 *1 .
C
Selects the CD-ROM *2 .
A bar will appear only under the selected device.