beautypg.com

Toshiba Qosmio G20 (PQG20) User Manual

Page 103

background image

User’s Manual

5-5

The Keyboard

Display selection: Press Fn + F5 to change the active display device.

When you press these hot keys, a dialog box appears. Only selectable

devices will be displayed. Hold down Fn and press F5 again to change the

device. When you release Fn and F5, the selected device will change.

If you hold down these hot keys for five seconds the selection will return to

LCD.

Internal LCD screen Brightness: Pressing Fn + F6 decreases the display

brightness in decrements. When you press these hot keys, the current

setting will be displayed for two seconds by a pop-up icon. You can also

change this setting through the Screen brightness item of the Basic Setup

tab in TOSHIBA Power Saver.

Internal LCD screen Brightness: Pressing Fn + F7 increases the display

brightness in increments. When you press these hot keys, the current

setting will be displayed for two seconds by a pop-up icon. You can also

change this setting through the Screen brightness item of the Basic Setup

tab in TOSHIBA Power Saver.

In Monitor-in mode, Fn + F5 is not available.

The brightness level is always set at the maximum value for about

18 seconds, when the LCD turns on. After 18 seconds, the brightness

level will return to the level set within the TOSHIBA Power Saver utility

or you can change it manually.

Display clarity increases with the brightness level.