Toshiba Tecra A4 (PTA40) - Manual (Page 136)

8-2 User’s Manual
Optional Devices
PC Cards
The computer is equipped with a PC Card expansion slot that can
accommodate one 5 mm Type II card. Any PC Card that meets industry
standards (manufactured by TOSHIBA or other vendor) can be installed.
The slots support 16-bit PC Cards, including PC Card 16’s multifunction
card and CardBus PC Cards.
CardBus supports the new standard of 32-bit PC Cards. The bus provides
superior performance for the greater demands of multimedia data
transmission.
Installing a PC Card
The PC Card slot is located on the left side of the computer. You can install
one Type II card in the slot.
Windows’ hot-install feature lets you install PC Cards while the computer’s
power is on.
To install a PC Card, follow the steps below.
1. Insert the PC Card.
2. Press gently to ensure a firm connection.
Inserting the PC Card
3. Check the configuration in the HW Setup window to make sure it is
appropriate for your card.
■ Do not install a PC Card while the computer is in standby or hibernation
mode. Some cards might not work properly.
■ An HDD or CD-ROM connected to a 16-bit PC Card, might affect the
performance of the computer’s sound system and data transmission,
including slower transmission speeds and dialing errors.
PC card
PC card slot