Dvd super multi drive – Toshiba Tecra A3X User Manual
Page 144
User’s Manual
9-12
Troubleshooting
DVD Super Multi drive
For more information, refer to Chapter 4,
.
Problem
Procedure
You cannot access a
CD/DVD in the drive
Make sure the drive's drawer is securely closed.
Press gently until it clicks into place.
Open the drawer and make sure the CD/DVD is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the CD/DVD. Make sure there
is no obstruction. Remove any foreign object.
Check whether the CD/DVD is dirty. If it is, wipe it
with a clean cloth dipped in water or a neutral
Chapter 4 for details on cleaning.
Some CD/DVDs run
correctly, but others do
not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's
needs.Check the CD/DVD's documentation.
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM:
DVD-ROM, DVD-Videol,
DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-RAM
CD-ROM:
CD-DA, CD-Text, Photo CD
(single/multi-session),
CD-ROM Mode 1, Mode 2,
CD-ROM XA Mode 2 (Form1,
Form2), Enhanced CD
(CD-EXTRA), CD-G (Audio
CD only), Addressing
Method 2
Recordable CD:
CD-R, CD-RW
Check the region code on the DVD. It must
match that on the DVD Super Multi drive. Region
codes are listed in the
section in Chapter 2, The Grand Tour.