Toshiba Tecra A3X - Manual (Page 128)

User’s Manual 8-9
Optional Devices
TV
A TV-out jack is provided with some models. You can connect a television
set to the TV-out jack on the computer. Follow the steps below.
Changing the resolution
If you want to change the resolution, follow the steps below.
1. Click start and click Control Panel.
2. Double-click the Display icon to open the Display properties
window.
3. Click the Settings tab and click the Advanced button.
4. Select the Adapter tab, then select List all modes.
5. Select a resolution from the menu.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below.
■ TV single
1. Click start and click Control Panel.
2. Double-click the Display icon to open the Display Properties
window.
3. Click the Settings tab and click the Advanced button.
4. Click Intel
® Graphics Media Accelerator Driver for Mobile, click
Graphics Properties, select Display Devices tab and select
Television in Single Display.
5. Change Video Standard and Apply and OK.
■ LCD/TV Mode (Dual Display Clone / Extended Desktop)
1. Click start and click Control Panel.
2. Double-click the Display icon to open the Display Properties
window.
3. Click the Settings tab and click the Advanced button.
4. Click Intel
® Graphics Media Accelerator Driver for Mobile, click
Graphics Properties, select Display Device tab.
5. Select Display Settings and Television tab.
6. Change Video standard and enter OK at Display Settings and
Apply and OK at Intel ® 915GM/GMS, 910GML Graphics Controller
Property.
■ There are 10 Video standards in the list, but please select one out of
following three Video standards,
■ NTSC-M (for the United States)
■ NTSC-J (for Japan)
■ PAL-B (for Europe)