Toshiba Tecra A3X - Manual (Page 114)

User’s Manual 7-4
HW Setup
3. Use the cursor keys to highlight the boot device you want and press
Enter.
HDD Priority Options
If more than one HDD is installed in the computer, this option lets you set
the priority for HDD detection. If the first detected HDD has a boot
command, the system will boot from the HDD.
A bar will appear only under the selected device.
■ If a supervisor password is set only, it is the following.
■ The menu above appear when you use the user password to start
the computer. (able to run HW Setup)
■ The menu above does not appear when you use the user password
to start the computer. (unable to run HW Setup)
■ If the supervisor and user password are set, it is the following.
■ The menu above appear when you use the supervisor and user
password to start the computer. (able to run HW Setup)
■ The menu above does not appear when you use the user password
to start the computer. (unable to run HW Setup)
■ The menu above appear when you use the supervisor password to
start the computer. (unable to run HW Setup)
■ The selection method above does not change the boot priority settings
in HW Setup.
■ If you press a key other than one of those above or if the selected
device is not installed, the system will boot according to the current
setting in HW Setup.
Built-in HDD −>
USB(Default)
The priority is set as built-in HDD −> USB
memory.
USB −> Built-in
HDD
The priority is set as USB memory −> built-in
HDD.
■ If a boot command is not found on the first detected HDD, the system
will not boot from the other HDD. It will search the next device in the
boot priority for a boot command.
■ Some modules may not be displayed.