Toshiba Tecra A3X - Manual (Page 117)

User’s Manual 7-7
HW Setup
Built-in LAN
This feature enables or disables the Built-in LAN.
Device Config
Device Configuration
This option lets you set the device configuration.
Parallel/Printer
Some models are equipped with Parallel/Printer tab. This tab lets you set
the Parallel Port Mode. Use the Windows Device Manager to make settings
for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the USB KB/Mouse Legacy Emulation
item to Enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Enabled Enables Built-in LAN functions. (Default)
Disabled Disables Built-in LAN functions.
All Devices BIOS sets all devices.
Setup by OS Operating system sets devices that it can control.
(Default)
This option is not displayed in some models.
ECP Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP. (Default)
Standard
Bi-directional This setting should be used with some other
parallel devices.