Pioneer PDK-WM03 - Manual (Page 13)

E-2
Examples of Symbols
This symbol informs that there are contents that demand caution (including warnings).
Concrete details of the caution are written within the diagram.
This symbol indicates a prohibited matter.
Concrete details of the prohibition are written within the diagram.
This symbol indicates something that must be done.
Concrete details of the prohibition are written within the diagram.
Ignoring this indication and improper handling could be the cause of per-
sonal injury such as a serious injury or death.
Before Use...
Symbols
This Operating Installations uses pictograms to indicate matters required for the installer to install the plasma
display properly and safety in order to ensure proper, safe use of the product and prevent injury to yourself and
others or damage to property. The pictograms and their meanings are indicated below. Be sure to understand
them well before reading the rest of the manual.
WARNING
CAUTION
Ignoring this indication and improper handling could cause injury to a per-
son or damage to the surrounding household belongings.
WARNING
Heed the Following
* When installing the plasma display, be sure to make a request for service with the dealer and ensure the
work is performed according to this manual. Incorrect installation may result in the plasma display falling
and causing injury.
* To prevent the plasma display from falling, the strength of the installation place and the method of fastening
must support the combined weight of the plasma display and the mounting unit for an extended period of
time as well as withstand earthquakes. Improper installation may result in the plasma display falling and
causing injury. Be sure to observe the following matters.
- An electrical outlet should be used for the power supply of the plasma display. Direct connection to a
power cable is dangerous and should not be used. Please use a power outlet that can be reached to
allow the insertion and withdrawal of the power plug.
- Installation for Wooden Walls
The load should by all means be carried by beams, and when the strength of the beams is insufficient,
they should be strengthened. The installation should not be made to skirting or supporting members. The
load should also be carried by beams when there is a steel beam suspended ceiling; installation should
not be made to the ceiling suspension fittings.
- Installation for Concrete Walls
Commercial anchors that are strong enough to easily support the load of the plasma display should be used.
* To ensure safety, bolts and screws must be tightened securely. Be sure to use the supplied parts for the
brackets and the other fittings.
Failure to do so may result in the plasma display falling and causing injury.
* When aligning the grooves of the display fittings to the fixed unit, check to make sure that they are securely
engaged.
Failure to do so may result in the plasma display falling and causing injury.