Xerox DocuColor 242-252-260 con built-in Fiery controller-16191 - Manual (Page 12)

Page 12
Mac OS X and Use Media Defined Profile
To set the Output Profile option to Use Media Defined Profile on Mac OS X, you must
first make sure that Two-Way Communication is not enabled, and then select Use Media
Defined Profile from the drop-down list for Output Profile. If you need to be able to select
specific downloaded output profiles, enable Two-Way Communication. For information
about establishing Two-Way Communication, see Printing from Mac OS.
Printer image
The printer image in the printer driver does not display properly if it is viewed in 24-bit
screen resolution. To display the image properly, change the screen setting to 16-bit or 32-bit
resolution.
Windows default settings
In the Windows printer driver, if you change the default settings for print options in the
printer driver, those settings apply to your computer only. To change the default settings for
all users, change the default settings on the Fiery Color Server server.
Entering an IP address
In the Properties dialog box, pressing Enter after you type an IP address closes the dialog box.
To move between fields, press Tab or use the mouse, and fill in all options before you press
Enter or click OK.
Printing Printing on Tab stock
After each document using tabs is finished printing, the paper tray holding the tab media will
automatically discard all unused tabs in the set. This is by product design to ensure that a full
set of new tabs is available for the next document.
Scale and N-up layout option
When you select two or more pages per sheet for page layout (N-up Layout option), the Scale
option is disabled (grayed out) because this combination of print settings is not supported.
You may be able to define settings to the same effect in your source application, for example,
using the “Pages per sheet” option in Microsoft Word or “Thumbnails” in Adobe InDesign
CS2.
Image Shift not available from applications
The print options related to Image Shift are not available in the Print dialog box of the
application you print from. You must set Image Shift options in the Fiery printer driver
(Finishing tab).