Xerox WIDE FORMAT AccXES Firmware 10.0 b140 (Release Notes) - Manual (Page 9)

Page 9
4 Release Installation
NOTES:
Feature keys from before version 9.0 B180 are no longer useable with version 10.0 firmware.
New keys must be acquired from the Xerox website to use your system. Downgrading below
9.0 B 180 will also require you to re-download your feature keys.
The AccXES Revision MUST be 9.0 or higher to upgrade to 10.0. If your current version is
lower than 9.0, you must install 9.0 or higher before upgrading to 10.0.
Regarding scanner firmware revisions: If you are upgrading the firmware of a system
containing a Xerox Wide Format Scanner, you must also ensure that the scanner firmware is
upgraded, prior to upgrading the controller, to the following version:
Xerox Wide Format Scanner – version 2.2.4 or greater. Version 3.2.5 or greater
needed for full functionality.
Xerox 7356 and 7346 Scanners are no longer supported.