Xerox WIDE FORMAT AccXES Firmware 10.0 b140 (Release Notes) - Manual (Page 24)

Page 24
9.3.3 Unix
Download the software using LPR with the following command line:
lpr –P printername HFT_721p _10_0b140.disk.bin
A status sheet will be printed and indicate that the download was successful.
NOTE: Make sure that the connection to the scanner is enabled. This is done on the
Web PMT, by going to Printer Defaults > Printer Setup. Select the “DDS Enabled” box.
Reboot the controller.
9.4 HFT Controller Installation for Xerox Wide
Format Print System X2 TECH
IMPORTANT NOTE: The controller will only accept the installation when there are no active jobs
being processed.
9.4.1 AccXES Client Tools
Download the file named “HFT_X2_10_0b140.disk.bin”. A status sheet will be printed
and indicate that the download was successful.
NOTE: Make sure that the connection to the scanner is enabled. This is done on the
Web PMT, by going to Printer Defaults > Printer Setup. Select the “DDS Enabled” box.
Reboot the controller.
9.4.2 Web PMT
Select PRINTER DEFAULTS > UTILITIES > Upload File. Use the Browse button to
select the “HFT_X2_10_0b140.disk.bin” file. Click on the “Upload” button. A printed
status sheet will indicate that the download was successful.
NOTE: Make sure that the connection to the scanner is enabled. This is done on the
Web PMT, by going to Printer Defaults > Printer Setup. Select the “DDS Enabled” box.
Reboot the controller.
9.4.3 Unix
Download the software using LPR with the following command line:
lpr –P printername HFT_X2_10_0b140.disk.bin
A status sheet will be printed and indicate that the download was successful.
NOTE: Make sure that the connection to the scanner is enabled. This is done on the
Web PMT, by going to Printer Defaults > Printer Setup. Select the “DDS Enabled” box.
Reboot the controller.
9.5 HFT Controller Installation for Xerox 6030/6050
Wide Format Solution