6 scanning, 1 when original size cannot be detected, When original size cannot be detected – Konica Minolta bizhub 500 User Manual
Page 74: 2 when memory capacity is exceeded, 3 automatic rotation of original document, Scanning -35, When original size cannot be detected -35, When memory capacity is exceeded -35, Automatic rotation of original document -35
Transmission
3
Network Fax
3-35
Tr
an
sm
iss
ion
Chapter 3
3.6
Scanning
3.6.1
When Original Size Cannot be Detected
When Original Size Cannot be Detected
If the size of the original cannot be detected, the following screen is
displayed. Set the original size when this screen is displayed.
1
Press the original size key.
2
Press [OK].
3.6.2
When Memory Capacity is Exceeded
While in the memory transmission, when there are a lot of originals, or when
there are a lot of information due to the image quality being fine and close, a
memory-over may result.
!
Detail
For details, see "Error Message Displayed" on page 5-5.
3.6.3
Automatic rotation of original document
Original document of A4(v) or 8 1/2 x 11(v) is automatically rotated at the
time of transmission and sent as A4(w) or 8 1/2 x 11(w).
!
Detail
If this automatic rotation is not desired, contact your service
representative.